Unique seal ring for heavily loaded axles
When coarse, inhomogeneous substances are pumped, pressed and transported around, pressure surges and loads on shafts, augers and rollers inevitably occur.
The result is familiar to most people: Leaks. Frequent gasket changes. Costly repairs. Operational disruptions. Downtime. Lost productivity. Costly damaging effects.
But one small thing can make a big difference: the seal. That's why it makes sense to check whether the gaskets in your operations are sealing properly.
- Shaft seals
Slurry. Sludge. Wastewater. Pulp. Raw materials.
When coarse, inhomogeneous substances are pumped, pressed and transported around, pressure surges and loads on shafts, augers and rollers inevitably occur.
The result is familiar to most people: Leaks. Frequent gasket changes. Costly repairs. Operational disruptions. Downtime. Lost productivity. Costly damaging effects.
But one small thing can make a big difference: the seal. That's why it makes sense to check whether the gaskets in your operations are sealing properly.
At Betech, we have many years of experience with seals for all types of equipment. For exposed applications in rotating equipment, we recommend LubSeal sealing rings.
Why choose LubSeal seals?
- Agro, slurry and biogas plants
- Water, sludge and wastewater plants
- Pulp and paper industry
- Offshore and marine industry
- Cement, gravel and marine materials
- Bulky goods and waste treatment
But what makes LubSeal so much better?
Flexible core prevents permanent deformation
Traditional packing cords deform when subjected to pressure surges. This means leakage - and ultimately stops production.
LubSeal has a flexible elastomer core that ensures high, continuous springback. The gasket retains its shape and tightness - even with repeated pressure shocks.
For tech, it matters: Less risk of leakage and better process stability.
For the economy, it means: Less downtime and lower maintenance costs.
Built-in lubrication extends service life
The hollow elastomer core acts as a reservoir and dispenses graphite or PTFE lubricant into the packing yarns.
The lubrication reduces friction and wear on the seal and shaft - and significantly extends service life.
Results: Longer replacement intervals and better operating economy.
Delivered made to measure - ready for easy and precise installation
Proper sealing of a rotating shaft requires experience and precision. The LubSeal seal is ready for direct installation because it comes with it:
- Optimal profile (round, oval, trapezoid or square)
- Precise length measurements
- Correct overhead bevel cuts
Results: Minimal risk of installation errors and optimal sealing from the start.
We guide you to the right solution
The combination of materials, process and operating conditions vary from one application to another, and at Betech we are experts in finding the right sealing solution for the conditions.
Should it be the unique LubSeal gasket or another type of seal? We help you decide after an assessment:
- Media type
- Temperature
- Pressure ratio
- Axle speed
- Chemical impact
