Duboschweitzer bolt locking
There are several ways to secure screws and bolts against loosening in applications that are exposed to structural shaking or movement from wind pressure or mechanical influences.
If you are looking for a solution that can also seal and insulate against galvanic corrosion, for example in screw connections between steel and aluminum, then you should consider the Duboschweitzer system, also called Dubo.
Betech is a solution partner and exclusive distributor of DUBOSCHWEITZER® in the Nordics.
Dubo is Effective locking of screws, bolts and nuts
Duboscweitzer bolt locking systems made of polyamide (PA 6) are ideal for locking, sealing and insulating your bolted joints. The system is universal for different bolt types and applications.
In addition to friction locking, which effectively prevents the screw joint from rotating or loosening, the system is chemically resistant to alkaline media, solutions of inorganic salts, oils, greases and petrol, alcohol, diluted acids and sea water.
Example of locking system installation without washer - before and after tightening.
Example of locking system installation with washer - before and after tightening.
Avoid damaging corrosion in screw joints
Corrosion in screw joints can be avoided by combined use of Duboschweitzer insulator and locking ring. The anti-corrosion system is suitable for the following metal combinations:
- Aluminum - Steel
- Iron - Copper
- Iron - Lead
- Brass - Iron
- Anodized (anodized) aluminum - Iron
- Zinc - Tin
product catalog
Download the product catalog for Duboschweitzer bolt locks:
Duboschweitzer bolt protection
Descriptions, installation instructions and dimension tables for locking rings, washers and insulators.
Dubo rings, washers and insulators
Duboschweitzer® Circlip
Polyamide retaining ring
Duboscweitzer bolt locking systems made from polyamide (PA 6) are ideal for locking, sealing and insulating your bolted joints.
Dubo locking ring provides both locking and sealing of the screw joint.
Duboschweitzer® Circlip DSL
Polyamide retaining ring with spring steel element
Duboschweitzer bolt locking systems made from polyamide (PA 6) are ideal for locking, sealing and insulating your bolted joints.
Dubo locking ring provides both locking and sealing of the screw joint.
Circlip DSL has an inlaid, toothed element of galvanized spring steel and is used for particularly high tightening torques.
bolt locking
Example of mounting
Locking and sealing around the screw head is achieved by controlled deformation of the locking ring.
The system provides active friction locking and seals against leaks by filling any voids in the joint.
Shown here with additional, toothed washer between plate and retaining ring.
(The system can be used with or without washers. Washer is used for bolts of hard steel quality in combination with high tightening torque).
Duboschweitzer® insulator
Polyamide insulation sleeve
The destructive corrosion that occurs when moisture accumulates between two connected metal parts can be prevented by using Dubo isolator together with the bolt locking system (Dubo locking ring).
The insulation system is recommended for joints of the following types of metal sheets:
- Aluminum - Steel
- Iron - Copper
- Iron - Lead
- Brass - Iron
- Anodized (anodized) aluminum - Iron
- Zinc - Tin
Anti-corrosion
Insulation against galvanic corrosion
Duboschweitzer as an anti-corrosion system has following components:
- Bolt
- Duboschweitzer isolator
- Aluminum plate (metal A)
- Steel plate (metal B)
- Duboschweitzer circlip
- Nut
Betech is solution partner and exclusive distributor of Duboschweitzer®
We are ready to advise you
The products on these pages are examples from our almost limitless universe of possible product solutions.
Need more information or didn't find what you were looking for?
Feel free to contact us We're ready to help you find the right solution.
